Product image. Check the selected model, lens, colour and package contents before ordering.

HiLook · Alarms

HiLook HA-ALARM-BKT Wall/Ceiling Mount Bracket – Adjustable Universal Bracket for PIR Detectors

Model / SKU: HA-ALARM-BKT

HiLook HA-ALARM-BKT Wall/Ceiling Mount Bracket – Adjustable Universal Bracket for PIR Detectors. HiLook HA-ALARM-BKT | Adjustable Wall/Ceiling Mount Bracket | PIR Detector The HiLook HA-ALARM-BKT is an adjustable mounting bracket designed for HiLook Pro wired PIR detectors. It supports both wall and ceiling installations, allowing flexible positioning to achieve optimal sensor coverage. Multi-angle adjustment ensures the detector can be aimed precisely to suit a wide range of room layouts and installation scenarios. Key Features Wall and Ceiling Mount: Supports both installation types for flexible detector placement. Multi-Angle Adjustment: Allows precise aiming of the PIR detector to suit the coverage area. HiLook Pro Compatible: Designed specifically for use with HiLook Pro wired detectors. Universal Design: Suits a wide range of room layouts and installation environments. Additional Information Product Overview Getting the most out of a PIR detector comes down to placement, and the HA-ALARM-BKT wall and ceiling mount bracket gives installers the angular flexibility to position HiLook Pro wired detectors precisely where coverage is needed. Designed as a dedicated mounting accessory for HiLook Pro wired detectors, the bracket supports both wall and ceiling installation, removing the compromise of fixed-mount positions that can leave entry points or room corners partially uncovered. Featuring a vertical adjustment range of 0° to 90° and a horizontal sweep of plus or minus 40°, the HA-ALARM-BKT allows fine-tuned sensor aiming after the bracket is fixed in place. Constructed from durable ABS plastic in a clean white finish, it suits residential and commercial interiors without drawing attention. It is well suited to hallways, open-plan rooms, retail floors, and commercial premises where standard mounting positions would not deliver the detection angle needed. Key Capabilities Vertical Tilt 0° to 90° A full 90-degree vertical tilt range lets you aim the detector downward from a ceiling mount or angle it sharply from a high wall position, ensuring the PIR lens faces the detection zone rather than open air above it. Horizontal Swivel of plus or minus 40° The bracket swivels plus or minus 40° horizontally, allowing directional correction after the base is fixed. This is particularly useful in corner installations where the structural surface angle does not align with the intended detection path. Wall and Ceiling Compatible Supporting both wall and ceiling mounting, the HA-ALARM-BKT works across a variety of room layouts. Ceiling mounting suits open-plan spaces where wall positions would miss cross-traffic movement patterns. ABS Plastic Construction The durable ABS plastic body keeps weight low while maintaining a firm hold on the attached detector. The white finish blends with standard interior wall and ceiling surfaces common in residential and commercial buildings. Best For Corner and High-Wall Positions: The plus or minus 40° horizontal swivel corrects for walls that do not face the detection zone directly, making corner placements workable without relocating cabling. Ceiling-Mounted PIR Coverage: The 0° to 90° vertical range allows the detector to be angled steeply downward from a ceiling surface, covering floor-level movement across a room or open corridor. Retrofitting Existing Installations: When adding detectors to a site where cabling entry points are already fixed, the adjustable bracket compensates for imperfect cable positions by reorienting the detector after mounting. Why Choose the HA-ALARM-BKT A standard fixed-mount detector relies entirely on the wall surface angle to determine coverage direction. In practice, this limits where sensors can be effectively placed, particularly in open-plan rooms, wide corridors, or spaces where cabling runs dictate the mounting position. The HA-ALARM-BKT resolves this by decoupling the detector’s aim from the fixed surface angle, with 0° to 90° of vertical tilt and plus or minus 40° of horizontal adjustment available after the bracket base is secured. This degree of post-mount flexibility reduces the need to reposition fixings or re-route cabling when coverage angles need correction. Built specifically to support HiLook Pro wired detectors, the bracket ensures a stable and secure hold rather than relying on a generic third-party mount that may not fit correctly. Available through Security Wholesalers, the HA-ALARM-BKT is a straightforward solution for installers who need reliable, adjustable sensor positioning across residential and commercial alarm installations. Buyer Decision Tips Compatibility Check: The HA-ALARM-BKT is designed for HiLook Pro wired detectors. Before ordering, confirm that your specific detector model is part of the HiLook Pro wired range. Wireless detectors or detectors from other brands may not seat correctly on the mounting point, and the bracket’s intended secure hold depends on a matched fit with compatible hardware. Key Features & Technical Specifications Model HA-ALARM-BKT Mounting Type Wall or Ceiling Vertical Adjustment 0° to 90° Horizontal Adjustment ±40° Compatible Devices HiLook Pro Wired Detectors Material Durable ABS Plastic Colour White Ideal Use Cases Residential Hallways and Entry Points In hallway installations where wall entry points may sit above the ideal detection angle, the 0° to 90° vertical tilt allows the detector to be aimed squarely at floor-level movement rather than pointing into open space above doorways. Retail and Office Interiors Open retail floors and office spaces benefit from ceiling-mounted sensors that can sweep downward across a wide area. The bracket’s ceiling compatibility combined with its vertical tilt range makes this practical without needing specialist mounting hardware. Commercial and Warehouse Premises High ceilings and wide floor areas in warehouses and commercial units require detectors aimed at specific zones. The HA-ALARM-BKT allows the installer to dial in the angle after fixing the base, reducing the need for multiple repositioning attempts. Retrofit Alarm Upgrades When upgrading an existing alarm installation where cable entry points are already fixed in place, the plus or minus 40° horizontal swivel compensates for surface angles that would otherwise result in the detector facing the wrong direction. Choosing the Right Model Choose this model if: You are installing HiLook Pro wired detectors in positions where the wall or ceiling surface angle does not directly face the intended detection zone, and you need post-mount adjustment of up to 90° vertically and plus or minus 40° horizontally to correct for this. Choose a different model if: Your detectors are wireless, from a different brand, or if your mounting surface already faces the detection zone squarely and no angular correction is required. In those cases, the detector’s built-in mounting holes may be sufficient without an additional bracket. FAQs Which detectors is the HA-ALARM-BKT compatible with? The HA-ALARM-BKT is designed for use with HiLook Pro wired detectors. It is not confirmed for use with wireless detectors or detectors from other brands. Always check that your specific detector model is part of the HiLook Pro wired range before purchasing the bracket. Can the bracket be used on a ceiling as well as a wall? Yes. The HA-ALARM-BKT supports both wall and ceiling mounting. Ceiling installation is particularly useful in open-plan areas where wall positions would not provide adequate coverage across the full floor space. The vertical tilt of 0° to 90° allows the detector to be angled steeply downward when ceiling-mounted. How much angular adjustment does the bracket provide? The bracket offers 0° to 90° of vertical tilt and plus or minus 40° of horizontal swivel. These adjustments are made after the base is fixed to the surface, so the detector’s aim can be fine-tuned without altering the bracket’s fixed mounting position. What is the bracket made from, and how durable is it? The HA-ALARM-BKT is constructed from ABS plastic. ABS is a widely used material in security and electrical accessories due to its light weight, dimensional stability, and resistance to impact in indoor environments. The white finish is standard for interior installations. Is this bracket suitable for a corner installation where the wall does not face the detection zone directly? Yes. The plus or minus 40° horizontal swivel is intended for exactly this scenario. Rather than mounting the detector directly to a surface that faces the wrong direction, the bracket allows the detector to be redirected toward the target zone after the base is secured to the wall. This makes corner and off-axis placements practical without re-routing cabling. The HA-ALARM-BKT is available through Security Wholesalers for these types of installer-focused applications. Additional Information No additional downloads available for this product.